How to Drain Air Compressor?


Air compressors are becoming increasingly popular. This flexible tool can be used for a number of domestic and industrial applications. It can be used to work with a nail polish, spray paint, pressure wash, drill, and many other functions including a pneumatic tool.

The air compressor compresses the air and saves it to drive the air tools. Due to the suspension, it can fit in a variety of tools. As it lasts longer, it makes a real one-time investment for many people. That is why it is so popular.

It is very important to keep your air compressor fully free and continue to serve you for many years. You must have a suitable schedule for repairing your air compressor. One of the most important repair steps is to remove the water compressor tank.

 

How Often Should You Drain Air Compressor Tank?

 

It is now a proven fact that water and a strong cocktail of contaminants and dust mixed with water can cause damage to your compressor and air tools.

Now you may be wondering how often you need to turn off your compressor to stay safe.

If you use your air compressor every day, then you should wash it every few days. In addition, the formation of moisture and dust will have a significant impact on the performance of your compressor and wind turbines.

 

How to Drain Your Air Compressor?

 

Now, draining air compressor is not rocket science. A few simple steps will have your air compressor working like new and lasting forever! There are two methods of drainage, manual and automatic. Let's explore two ways one by one-

1)    Manually Draining Your Air Compressor

 

i) Find Out Where the Drain Valve Is Located

 

In most air compressors, an exhaust valve is located at the bottom. In a few rare cases, it can be on the side. Although the side valve is well positioned to open and close, it does not work well to drain completely.

A side valve is installed to drain the water at air pressure. Without air pressure, you can't go out with this design. Also, the placement of the side can sometimes allow rust to prevent opening. It makes sense to go for an air compressor with a drain valve at the bottom.


ii) Open the Drain Valve to Let Out the Water

 

If the valve is located at the bottom, it will immediately begin to drain when opened. Keep the pan underneath to catch dripping water if you do not want to contaminate your bottom. Tilt the tank to release all the gunk.

For air compressors with a side metal valve, you need air pressure to drain the water. Start the compressor to create air pressure and turn it off after a while. Open the valve and see the water pumped by compressed air. Keep a container close to catch the gunk.

 

iii) Close the Valve

As soon as your air compressor is drained, the exhaust valve should close. It is wise to apply cord tape to the drainage valve before closing it.

This will ensure that there will be no leaks. To check for leaks, use a compressor and then use soapy water and installation of an exhaust valve. If soapy water overflows, you should tighten the valve with a wrench. Also check airtight measurements with soap and water. If you notice a leak, remove the valve, use more tape and install it properly and inspect it. If there is a leak even after this step, replace the valve.

 

2)  Using an Electronic Automatic Drain Valve

 

Many of us find it a chore to drain our air compressors regularly. Therefore, automatic electronic output has become a popular option. This feature is especially useful when you have a heavy compressor.

All you have to do is remove your existing bag valve and replace it electronically. You also need to set the frequency where you need to unplug your compressor.

For people who use their air compressor daily, set a discharge time calculator once daily.

The electronic discharge valve should be connected to a 12v power source. You also need to set a timer according to usage frequency. Do not forget to store the pan to hold all the drained liquid and drain it before it overflows.

 

Some Measures to Follow While Draining Your Air Compressor

        ·         Make sure the compressor is not connected to the power source.

        ·         Wear safety goggles and gloves.

        ·         Bend the compressor to drain all the water.

      ·         Tighten the valve properly after discharge. If necessary, use duct tape to keep the valve from entering the air.

        ·         Check for leaks in the valve using soapy water.

 

Some Concluding Thoughts

An air compressor is a tool that does many things that most people consider a godsend! It operates a variety of domestic and industrial aviation tools. But you should remember that air compressors are very powerful. They press and hold the air with great pressure.

If not handled properly, these versatile tools can be truly dangerous! An explosive tank can cause serious damage to anyone nearby. Manufacturers of air compressor take safety precautions seriously. All the latest air compressors are sturdy and have several safety features in place.

That being said, a little care from time to time from your part will go a long way in improving the life of your air compressor and air tools. You will enjoy working with your air compressor in complete peace of mind with the help of the guide above.


Post a Comment

0 Comments